d specifications electrical current and voltage rating: make and break resistive load 1.5 amps @ 28 vdc; 0.25 amp @ 115 vac. current carrying capacity: 9 amps. dielectric strength: 1,000 vac between current carrying parts and ground. contact resistance: average initial 5 milliohms. insulation resistance: in excess of 750,000 megohms. hardware: mounting nut and lockwasher are shipped assembled. glass epoxy insulation switches - 15 indexing adjustable stops - so lder lug terminals - stops set @ 2 pos. specifications and ordering information d9 - series 2 5/16" diameter 1.5 amps @ 28 vdc mechanical materials and finishes: all parts utilize non-corrosive materials as standard. clips and rotors: brass with silver plate as standard. insulation: glass epoxy. index: dual-ball, hill and valley design. index life: 25,000 cycles minimum. index torque: switches have lowest practical torque consistent with crisp detenting and smooth, reliable operation. index angles: positive 15 standard. index stops: adjustable standard, fixed or continuous. stop strength: 25 in. lbs. minimum. standard part number dimensions * figures are shown on page 57. standard construction d9g - glass epoxy construction 34 unit of electro switch corp. electronic products 2010 yonkers road raleigh, nc 27604 t elephone: (888) rotarys or (919) 833-0707 fax: (800) 909-9171 or (919) 833-8016 active poles/ no. of shorting non- fig. poles positions section sections shorting * the d9 series has a 15 index with a maximum of 24 positions. indexing is provided by a dual-ball hill and valley design. standard features include solder lug terminals, adjustable stops and glass epoxy insulation. 01 02-23 1 1 d9g0123s d9g0123n du 02 02-23 1 2 d9g0223s d9g0223n du 03 02-23 1 3 d9g0323s d9g0323n du 04 02-23 1 4 d9g0423s d9g0423n du 05 02-23 1 5 d9g0523s d9g0523n du 06 02-23 1 6 d9g0623s d9g0623n du 07 02-23 1 7 d9g0723s d9g0723n du 08 02-23 1 8 D9G0823S d9g0823n du
d additional options and ordering information d9 - series unit of electro switch corp. electronic products 2010 yonkers road raleigh, nc 27604 t elephone: (888) rotarys or (919) 833-0707 fax: (800) 909-9171 or (919) 833-8016 35 d9 g customers specified order number for standard options (specify) (specify) (specify) additional options (specify) (specify) (specify) (specify) shaft as vi ewed with non-turn lug at 9 o'clock and shaft in extreme ccw position and strut bolts oriented vertically. shaft , bushing , and flat options u w z y custom switches are available. contact the factory with your complete specifications. printed circuit board options p.c. board mounting pattern r 2 digit insulation total active contact series type poles positions type terminal index stop shaft/ shaft type angle type bushing flat d9 g - glass 01 - min. 24 - max @ 15 s- shorting n- non shorting l- solder lug a - adj. r- rear p.c. f - fixed c- cont. see see chart chart ? ? how to order additional options:
|
